- Ultra-thin, lightweight size that can be easily attached to smartphones. A novel design that makes you want to touch it.
- Equipped with health and operability functions such as the smartphone feels light and the posture is easy to occur at the bottom fulcrum
- High strength prevents smartphones from falling. As it is an adsorption material, it can be removed as many times as you like.
Do you think that all smartphone rings have the same design? A completely new smartphone ring that overturns such common sense has appeared. Its name is "NYANTO"
NYANTO is a spin-off product with a redesigned appearance while retaining the functionality of " SYANTO ", which reinvented the smartphone ring (functionality such as feeling light at the bottom fulcrum and raising the posture with the little finger).
It looks like a curled cat or small animal. But in fact, it's an epoch-making tool packed with usable functionality.
I will explain what kind of tool it is, one by one while introducing NYANTO's unique functionality.
Mofumofu and cute! But that's not all
"NYANTO" is an epoch-making tool that changes the way you hold your smartphone, which is derived from the previously popular "SYANTO". The square stand ring is made of genuine leather and fits well in your hand, and by holding it between your fingers, you can naturally hold your smartphone without exerting any force on your fingers.
This time, in addition to the functionality of the conventional model, I attached polyester fur. At first glance, it doesn't look like a smartphone ring, so it's recommended for people who have avoided smartphone rings.
Since NYANTO supports the smartphone with the bottom of the smartphone as the fulcrum, the center of gravity is lowered, the balance of the smartphone is stabilized, and the operability is improved. Of course, as with conventional smartphone rings, it also greatly reduces the risk of smartphone falling.
"Hands" that reinvented the smartphone ring
If you have a smartphone, you will inevitably have to hold it with your hands. Due to the increase in size and weight of smartphones these days, it is becoming more difficult to hold them, and they are becoming unstable unless you put effort into your hands.
After a lot of trial and error to solve this problem, NYANTO came to the conclusion that by supporting the weight of the smartphone with the "bottom fulcrum", it was a completely new way of holding the smartphone, " putting it on your hand " without holding it.
As a result, even with smartphones that are getting bigger and heavier, the burden on the wrists and neck will be reduced, and the posture will naturally occur. We have obtained a patent * 1 for this mechanism originally devised by NYANTO.
It's hard to notice the strain on your body caused by how you hold your smartphone, but when you actually use it, you'll notice a big difference.
* 1 Patent No. 6467677
This presence that does not lose sight of the smartphone
I'm supposed to use my smartphone every day, but sometimes I get "Where is my smartphone?" NYANTO like a fashionable fur charm has a big impact. The voluminous design makes it easy to find a smartphone!
Even if you put it in your backpack, you can know the location immediately, so you can take out your smartphone instantly. It weighs only 30g, so you don't have to worry about the weight.
The fur is made of polyester fiber. It's a fluffy feel that makes you want to touch it.
Also functions as a smartphone stand
NYANTO has a stand function (vertical and horizontal) that is useful for everyday use.
By placing it on the table and adjusting the angle of the stand ring, it can stand on its own in both vertical and horizontal directions, which is useful for multitasking and when both hands are occupied.
Do not put a strain on your neck or wrists by raising your posture
Have you ever used your smartphone for a long time and felt a strain on your neck? It may be because I'm using my smartphone with my neck bent.
An adult's head weighs about 4 to 6 kg, and it is said that the load on the neck is several times the weight of the head just by turning down. The burden is not only on the neck but also on the shoulders and back muscles, which may lead to the accumulation of fatigue on the entire neck and shoulders.
That is why it is necessary to consciously lift the smartphone and look at it from a high point of view, but the higher the point of view, the more unstable the smartphone becomes and the more likely it is to drop it.
Since the smartphone is stable at the bottom fulcrum of SYANTO, you can hold the smartphone at a higher position. If you raise your viewpoint, your posture will increase, which will reduce the strain on your neck.
Strength that is more than enough for an ultra-thin material
In order not to drop the smartphone, the smartphone ring must also have strong strength. The main body sheet of "SYANTO V-ring" is as thin as 0.4mm, but it does not sacrifice strength.
For the mounting base sheet, a high-strength sheet of polyfiber + vinyl chloride is used to ensure ultra-thinness and high strength, and by using genuine sheep leather for the ring part, it is secure to the touch and strong. It is a self-confident work that ensures ease of use.
* The suction tape is 0.4 mm and the adhesive base is ≈ 0.8 mm.
Not only the strength against weight, but also the " tear strength " has been increased assuming various usage environments . The sheet will not be cut even if you apply weight while tearing a part with scissors.
* Do not imitate the carry bag (approx. 15 kg), etc., as it is due to the tearing experiment environment.
* This image is from the previous work, SYNTO V-ring, but NYANTO also uses the same material.
Compatible with wireless charging and MagSafe for iPhone
Since SYANTO does not interfere with the back of the smartphone, it is compatible with general wireless charging as well as the "MagSafe charger" and "MagSafe compatible mobile battery" that were first adopted in Apple's iPhone 12 series.
* Wireless charging / MagSafe mobile battery installation verification and charging verification were performed, but there was no particular problem because the back is flat and there are no protrusions.
Easy installation that can be reattached as many times as you like
No matter how strong it is, it doesn't make sense if the main unit comes off the smartphone. "SYANTO V-ring" has solved this problem with a completely new mounting method that utilizes a smartphone case.
To attach it, simply remove the smartphone case, pass it through the charging port, and attach it to the smartphone body or case. Also, because it uses an adsorption material instead of an adhesive material, you can reattach it as many times as you like without soiling your smartphone .
* Even if dust or dirt adheres to the adsorption surface, the adsorption will be restored by washing with water.
In addition, the leather material that connects to the smartphone is an ultra-thin 0.4 mm material, so you will not feel any bulge when you hold the smartphone. It needs to be used with a smartphone case for installation, but it fits most cases on the market. You can use your smartphone as usual because it does not interfere with the charging cable.
Street corner interview: I had NYANTO actually used
Anti-virus cleaner "SYANTO CLEAN" that comes with all returns
In this project, the screen cleaner "SYANTO CLEAN" made of antibacterial and antiviral materials will be attached to all returns. SYANTO CLEAN is a cleaner for smartphone screens that is impregnated with "All Titanium AT254", which is a colorless, transparent, odorless air catalyst solution that has antibacterial and antiviral effects. It cleanly removes oil stains on the screen, and because it is an adsorption type, it does not lose its adsorptivity no matter how many times it is washed. In addition to the basic performance of a titania-based air catalyst, it is a hybrid of Japan's leading high-performance antibacterial and antifungal agents.
The suction sheet on the back side will suck if it is a smooth surface. You can attach it to the back of your smartphone when you're not using it, so you don't have to worry about storing it.
With "SYANTO CLEAN", which has antibacterial and anti-will performance of AT254, I would like to keep your posture and smartphone clean.
Details of product specifications
Product name: NYANTO
Product details: Smartphone cage
Product size: Base length 16.6 (mm) x width 30 (mm) x thickness 1.2 (mm)
Fur size: 10cm X 10cm
Product weight: ≒ 30g
Ring part: Cowhide (black)
Fur part: Brown faux fur (eco fur) adopted (made of polyester)
Sheet base material: Vinyl chloride + polyester fiber
Tear strength: Vertical 239N Horizontal 195N JIS L1096A method
Sheet base material Thickness: ≒ 0.4mm
Adhesive material: Adsorption type re-peelable tape
Product name: SYNTO CLEAN
Product details: Coating agent for viruses "All Titanium AT254"
Material: Surface microfiber
Surface processing: "All titanium AT254" coating processing
Back side: Adsorption acrylic foam
Size: 33 x 50 mm
Base color: Gray
* Because it is a suction type, it may not stick if the adhesive surface is uneven.
Achievements of SYANTO series
Don't hold it! The "SYANTO" series has been crowdfunded in the past. We have received support from many people. Thankfully, there are now many repeaters who support us every time a new series comes out.
Through crowdfunding, the concept and functions of the developed product were highly evaluated, but on the other hand, improvements were also found, and this time SYNTO has evolved the following functions.
・ High strength and thinness (0.8mm) established with a hybrid seat of reinforced seat and genuine leather
-Changed the bonding method to "adsorption tape" that does not get dirty. Establishes ease of installation and strength
This crowdfunding product is a self-confident product as a result of repeated improvements.
Thank you for your support!
If you listen to the voices of past crowdfunding supporters, I won't grasp it! I think you can feel the goodness of your hands.
The road to the birth of the product
With the advent of the digital world, people are getting different devices, carrying them to different places and using them. As a result, they spend most of their day with digital devices, and unknowingly accumulate health hazards, and more and more people are spending unclean days.
The SYANTO series was developed to provide the value of people, health + α as an "acupuncturist" and "motion researcher".
Representative Director Shigetoshi Kaiya
<Akebi Movement School Co., Ltd. Corporate Philosophy>
Walk / eat / think. People live in motion!
Accumulation of movement creates oneself.
Create yourself with the movements you want to be!
The Akebii Dual Movement School carries out activities that enrich life with movements.
We are looking for partners to manufacture and sell our patented bottom ring.
Please feel free to contact us.
Risk & Challenge
Risk & Challenge We will sincerely proceed with the project to manufacture the smartphone ring hand rest "SYANTO" as an operation support product. * If there is a change in the product specifications during the manufacturing process, we will report it from the activity report at any time. * If there is a delay in manufacturing or shipping the product, we will report it from the activity report at any time. Lastly, we will provide it with all our employees so that they can pick up SYNTO and make everyone happy. Thank you for your support. Cancellation policy === The schedule described in the text is It is planned at the time of project release. Due to the nature of support purchases, there is a risk of delivery delays. As a general rule, we cannot cancel support purchases due to delivery delays, but if it exceeds 3 months from the scheduled return delivery month, we will cancel only those who wish. ===