I couldn't enjoy the winter camp because it was cold. Do you have such memories?

For a few minutes after sitting down, your body temperature will not escape and you will feel the warmth of the floor .

The "Zutto Poka Poka Sheet" has a unique structure that combines high heat insulation that keeps 32 ° C even when used on ice , waterproofness, water repellency, and cushion-like sitting comfort. Protects you from the cold anywhere without the need for a power source.

I want to make a warm sheet that doesn't require electricity.

It's a dream-like story, but I thought that it would be possible if I used vacuum insulation, so I applied a vacuum insulation panel. We also applied for a patent and developed products in 2019 and 2020, each of which will be introduced at Makuake. This is the third work.

The conventional product is also very warm and has been highly evaluated by supporters, but the vacuum insulation sheet has the problem of being hard and expensive.

Therefore, we took on the challenge of developing an inexpensive new vacuum insulation sheet while maintaining flexibility, and realized this time. We were also able to return the cost reduction. Moreover, the inner of the seat is made of a highly hygroscopic material, which makes it feel smooth not only in winter but also in summer.

We hope that it will help you to forget about the cold and spend your time comfortably when you enjoy outdoor activities such as winter camps.
Please enjoy winter in Japan with a warm and warm sheet made in Japan.

1. Insulation that can keep 32 ℃ even when used on ice . Protects your body from the cold.

Due to the vacuum insulation sheet and structure that do not allow cold air to pass through , it is as warm as sitting in the living room, even in winter camps and outdoors.

Do you know the one with the highest heat insulation performance?
It's a "vacuum". It is also used in thermos bottles.

This product uses a vacuum insulation sheet that utilizes vacuum to achieve high insulation .

High heat insulation and elimination
of bottom cold The figure below is a conceptual diagram comparing the heat insulation of "porous silica" used in a vacuum heat insulation sheet and "urethane foam" which is often used as a heat insulation material for houses .
Normally, "porous silica" has higher heat insulation, but with this product, the thermal conductivity is increased from about 0.028 W / mK to about 0.015 W / mKby vacuum decompression treatment, and heat insulation is about twice as much. Use it to improve the effect .

Keeps 32 ° C even on ice to prevent cold air
Left: This product (vacuum insulation sheet + urethane foam) and
right: Urethane foam only,
sit on ice and compare the temperature changes after 5 minutes. Thing.

Temperature of the seat surface indicated by the cross mark, this product who is high in a wide range has become, from the ice to prevent the cold air will not.

Internal structure that protects you from the cold

LAYER.1 Breathable waterproof material

Even if you spill a drink, wipe it off quickly. Easy to clean.
The cover is made of breathable waterproof material "Brizatec®".
The surface of the fabric is a high-performance material that repels water and has both water-repellent and waterproof properties and the ability to dissipate the moisture that has accumulated inside.

LAYER.2 Urethane foam

Even if you use it for a long time, you will not get tired easily .
In order to improve cushioning, we use two 2 cm thick ones on the seat side.
It also has a heat insulating effect that utilizes the air layer.

LAYER.3 Vacuum insulation sheet

After sitting for a few minutes, it keeps warming up .
Achieves high heat insulation with a unique new technology that uses porous silica as a vacuum material.
It keeps your body temperature warm from above and prevents cold air from below.

2. Keep warm and comfortable forever.

It doesn't get tired even if you sit for a long time, and it doesn't interfere with your enjoyment.
It doesn't get warmer than your body temperature, so you don't have to worry about low-temperature burns even if you continue to use it .

A new powder "porous silica" that fits the shape of the buttocks is used for the vacuum material.
Since it is a powder, it can be shaped freely and fits into the shape of the buttocks .
In addition, 2 cm thick urethane foam is also included in two layers for added cushioning .

* Vacuum valve facing upward (seat side). The high cushioning of urethane foam does not bother you.

3. No power supply required, no need to worry about running out of battery.

Protects you from the cold anytime, anywhere, even in winter camps where power is needed, without worrying about running out of battery .

Since the vacuum insulation sheet utilizes body temperature, it is always warm without using electricity .
Of course, there is no problem even during a power outage .

4. Water-repellent fabric makes it safe to get wet. ??

You don't have to panic in the sudden rain. You can use it with confidence even on a wet bench after the rain.

A breathable waterproof material "Brizatec®" is used for the cover .
The fabric repels water, so it's easy to clean. Hand washing is also possible.

* There is no waterproof effect on the fastener part.

Please spend a relaxing and comfortable time with a pleasant conversation.
There are two sizes, M / L, to prevent any chair from getting cold.

It also prevents the bottom from getting cold in the winter tent, so you can stay sound until morning.
Since multiple L sizes can be connected with a button, they will not fall apart while sleeping.

The loading platform of the car is also a relaxing space where you can spend more time.
It has a high cushioning property, so you don't have to worry about bumps in the car.

Even if you stay in the car, it's warm all night. You can sleep well and feel refreshed, and you can drive the next day without worry.
You don't need a power supply, so you don't have to worry about the battery.

Take a break without being jammed by the coldness of the bench.
If you don't need a power supply, you can place it anywhere.

Easy to clean.
The cover repels water and dirt, so wipe it off quickly even after placing it on the ground.

I want to go camping again.
Light and easy to carry anywhere.

It can be easily connected.
We adopted a simple structure that can be fastened with a button. (Specifications for L size only)

You don't have to worry about getting cold anymore.
Please use it in various ways according to the purpose.

Warmth like floor warmth without using power supply.
It can be connected so that it does not fall apart according to the size of the car.

Convenient for everyday use of the drive. It's always warm.
The M size fits the seat and the L size fits the backrest.

Do not drop when moving the chair.
The M size can be tied to the backrest with a strap, so you don't have to worry about it falling off.

Can be used with electric blankets.
The "forever warm seat" does not use a battery.

Winter events, waiting times and games are cold-free.
A unique structure that uses vacuum insulation protects you from cold bottoms.

Even outdoors watching over your loved ones, your heart and seats are always warm.
It is a structure that reflects and utilizes body temperature.

Great for midwinter smelt fishing.
With high heat insulation, it keeps 32 ℃ even when used on ice.

For waiting time until the slope opens, for cold bottom in the car and battery measures.
It is a structure that does not allow cold air from below to pass through.

Measures against cold during work. It's as if the floor is warm all the time. Also for summer cooling measures.
No need for an outlet, no matter where you are.

Peace of mind in the event of an unexpected disaster or power outage.
It can be used all the time without a power supply.

It can be used comfortably even in the humid summer of Japan .
Please remove the transparent film of the vacuum insulation sheet and return only the contents. Porous silica in the non-woven fabric has the property of releasing moisture without accumulating it.
* I am shooting with a prototype.

* You can also use the khaki side as the surface.
In that case, the cover damage prevention for, the vacuum valve upward vacuum insulation sheet was, on the please use to put on the cover with a urethane foam two of the order.

* The string is M size only, and the button connection is L size only.

The insulation sheet is not evacuated at the time of sending . Be sure to follow the procedure below before using.
1. Smooth the powder in the non-woven fabric as evenly as possible.
2. Suction from the vacuum valve using a vacuum cleaner or the like.
3. Put it back in the cover in a vacuum state.

* Depending on the suction method, the silica gel inside may be offset.
* Some unevenness may remain on the surface.

* A vacuum insulation sheet is placed on the urethane foam for shooting.

* The string is M size only, and the button connection is L size only. Material: All made in Japan Cover: Brizatec ® Vacuum insulation sheet: Vacuum holding film / Non- woven fabric Contents: Silica gel

The moisture-permeable and waterproof material "Brizatec®" is a high- performance material that repels water on the surface of the fabric and has both water-repellent and waterproof properties and the ability to dissipate the moisture that has accumulated inside . Due to the microporous structure of special polyurethane formed in the middle layer, the surface side of this membrane is a pore structure with fine pores, water droplets cannot pass through this membrane, and moisture passes through and is released to the outside.
* Brizatech® is a registered trademark of Toray Co-Tex Co., Ltd.

Front fabric : 100% nylon / Back fabric: 100% tricot nylon

Rinse and rinse indication

* When using an iron, please use a patch.

Q. Is it possible to wash?

A. You can take out the vacuum insulation sheet and urethane foam inside, and wash only the cover by hand . Please refer to the washing label above. After washing the cover, please dry it in the shade.

Q. How long is the product life?

A. There is no particular life, but it depends on the durability of the cover, non-woven fabric, and vacuum compression material depending on the usage conditions. The vacuum can be restored using a vacuum cleaner or the like. The transparent film can also be repaired with repair tape.

What is a good lab?

"Unleash
the potential made in Japan and start a good thing lab" Let's release the potential made in Japan together. Many technical products are great but unsuccessful. Even if it is highly evaluated by those who used it with technically excellent products, it is not well known and it does not sell well and it is discontinued. There are not a few such technologies and products. In the era of marketing heyday, we brought low-priced products produced in countries with low social insurance premiums and taxes, low electricity costs and low environmental measures costs from overseas, and the development cost burden was 0, beautiful shooting, good-looking promotion, large For hit products and big brands. Is this all right for Japan? This has continued for decades, with the relative competitiveness of Japanese brands declining, the employment environment in Japan deteriorating, the number of science-related human resources declining, and the national power declining. Japan will not grow up with this. I want to unleash the potential of Japanese manufacturing together.

"Developing good things x Communicating goodness = Maximizing the joy of customers' use"
Techno Gateway Co., Ltd. and MUGEN Co., Ltd. jointly launched in June 2021 as a concept brand. We will deliver the materials and technologies carefully selected mainly in Japan with an easy-to-understand and easy-to-use design. Until now, Hayakawa of Techno Gateway Co., Ltd. has been conducting research, development, design, marketing, manufacturing, sales, and support alone, but we have partnered with Mugen Co., Ltd. for design, which is an important point of contact with customers. We will provide products that are more satisfying.

・ Technology development / Technology discovery: Techno Gateway Co.
, Ltd.・ Design: Infinite Co. , Ltd.
・ Initial cost: Supporters

To commercialize and commercialize good things in the lab. Let's make this flow bigger together!

What is a techno gateway?

Thanks to everyone, we were able to celebrate the 10th anniversary of our founding. A company that realizes comfort with chemistry in Kisarazu City, Chiba Prefecture.
There were many things on the way to this point. Founded in October 2011. that's right. This year, the Great East Japan Earthquake struck in March, and I was suddenly reminded that everyday life would no longer be normal. We have launched Techno Gateway Co., Ltd. to help you in your limited life without regrets. Initially, a subsidiary was established in Thailand to export Japanese high-performance resins to Thailand for HDDs, but the market has shrunk due to the rise of SSDs and downsizing. In 2017, we sold our subsidiary and took on the challenge of developing new products in Japan that apply our knowledge of chemistry. We received a great deal of human and financial support from the people of Kisarazu City and Chiba Prefecture, realized the development of many new products such as soft diatomaceous earth at the Kazusa Incubation Center, and solicited support through domestic crowdfunding. rice field.

So far, the total amount of crowdfunding at two locations is about 36 million yen. Thanks to the support of many supporters, we were able to develop an innovative product.
If you notice, this is the 10th year since the company was founded. We would like to continue developing new products that will help everyone's comfort. In addition, before the start of this project, we asked all the supporters to answer the questionnaire, which was a great reference for studying the specifications. Thank you very much!

Kisarazu City Chamber of Commerce and Industry Excellent Member Company Commendation!